產品詳情
產品名稱: AFPXR-200 PT100熱電阻鍍銀高溫連接線
產品型號: AFPXR-200 PT100
產品價格: 電議 特價:電議
AFPXR-200PT100熱電阻鍍銀高溫連接線
【簡單介紹】
AFPXR-200PT100熱電阻鍍銀高溫連接線,本產品為熱電阻的高溫連接線。產品具有優良的耐腐蝕性能,幾乎不溶于任何有機溶劑,可耐油、耐酸堿等;具有優良的電絕緣性能,耐高電壓,不吸潮,絕緣電阻大;具有阻燃性能。
【詳細說明】
AFPXR-200PT100熱電阻鍍銀高溫連接線
一、AFPXR-200PT100熱電阻鍍銀高溫連接線產品執行標準 企標
Executive standard: enterprise standard
二、型號
Type
Executive standard: enterprise standard
二、型號
Type
型號 Type |
名稱 Name |
AFPXR200 |
熱電阻專用高溫屏蔽電線 high temperature cable special for thermal resistance |
三、使用特性
operating characteristics
1、交流額定電壓:U0/U 300/300V
A.C. rated voltage: U0/U 300/300V
2、工作溫度:電纜導體長期工作溫度為200℃。
Long term operating temperature of cable conductor is 200℃.
3、AFPXR-200PT100熱電阻鍍銀高溫連接線導體:多股鍍銀銅絲。
Cable conductor consists of multi-strand silver plated core wire.
4、彎曲半徑:電纜彎曲半徑不低于電纜外徑的6倍。
Bending radius of cable shall be no less than 6 times that of cable outer diameter.
5、阻燃特性:符合GB19666-2005。
Flame resistant characteristic shall meet the requirements speculated in GB19666-2005 standard.
四、技術性能
Performance parameter
項目 Item |
單位 Unit |
技術指標 Technical Indices | |||
20℃時導體直流電阻≤ Conductor DC Resistance at 20℃ |
Ω/KM |
截面 Cross section |
0.2 |
0.3 |
0.5 |
電阻 Resistance |
83.5 |
49.5 |
30.2 | ||
試驗電壓 test voltage |
V |
1.5KV,5min不擊穿。 Finished cable shall endure 1.5kv voltage test for 5 min without puncture. | |||
絕緣電阻 Insulated resistance |
MΩ |
500 |
AFPXR-200PT100熱電阻鍍銀高溫連接線
五、結構尺寸
External dimension
五、結構尺寸
External dimension
型號 type |
規格 Specifications |
參考外徑 Reference diameter |
AFPXR200 |
1*2*0.2 |
1.2*2.8 |
AFPXR200 |
1*2*0.3 |
1.3*3.2 |
AFPXR200 |
1*2*0.5 |
1.6*3.8 |
AFPXR200 |
1*3*0.2 |
3.1 |
AFPXR200 |
1*3*0.3 |
3.4 |
AFPXR200 |
1*3*0.5 |
4.0 |
六、AFPXR-200PT100熱電阻鍍銀高溫連接線電纜示意圖
The figure of cable structure
The figure of cable structure


七、注意事項
Notes
施工時嚴格防止電纜損傷,降低產品性能。
Cable damage and performance reduction are strictly prevented during installation.
八、交貨要求
Delivery requirement
允許根據雙方協議長度交貨;長度誤差不超過±5%。
Delivery length of cable depends on both agreements with length error allowance of ±5%.
Notes
施工時嚴格防止電纜損傷,降低產品性能。
Cable damage and performance reduction are strictly prevented during installation.
八、交貨要求
Delivery requirement
允許根據雙方協議長度交貨;長度誤差不超過±5%。
Delivery length of cable depends on both agreements with length error allowance of ±5%.
發布日期:2026-07-08 11:16:21


